|ZipStop Brake Device|
The zipSTOP brake is revolutionizing the challenge course industry.
The zipSTOP uses a self-regulating magnetic braking system to brake zip line participants comfortably and reliably.
With the ability to brake participants effectively at high velocities, the zipSTOP fills a critical need for zipline operators.
The assembly includes:
zipSTOP brake device
Meets ASTM F24 Standards
|zipSTOP Bump Stop Replacement|
Replacement bump stop for zipSTOP Brake Trolley.
The Bump Stop is considered a sacrificial part that is designed to wear out over time and require replacement. The time it takes a Bump Stop to wear out will vary greatly between facilities and depends many factors including throughput rates, weather, reduction line ratio, rider trolley type, incoming speed, etc., but can be anywhere from 1-6 months. There is no way to calculate the exact life expectancy of the Bump Stop due to the individual nature of each zip line, and we recommend purchasing additional Bump Stops at the time of ordering your zipSTOP to prevent your business from experiencing any downtime during the replacement process.
|Zip Stop IR|
The zipSTOP IR is a more streamlined version of our popular zip line brake. The "IR" stands for internal reduction, meaning that the device does not require an external reduction line system. This device can accommodate speeds to 37 mph (60 kph) without the need for a reduction line system, making installation easier.
|zipSTOP Replacement Braking Line|
The Braking Line is the 12.5M (41 ft) line that extends during the zipSTOP activation.
The Braking Line must be replaced immediately if it is worn or damage or at 12 month intervals, whichever comes sooner.
Please refer to the zipSTOP Installation, Operation and Maintenance Manual for details on line inspection and replacement.
|Full Body Harness|
Designed for Safety:
Simply step into the leg loops, tighten up the shoulder straps and your full body harness is ready for action. Designed especially for rope and zipline courses.
|IMPACT TROLLEY IMPACT SURFACE REPLACEMENT KIT|
The Impact Surface Replacement Kit allows you to replace the Impact Surface on your Impact Trolley should it wear out. This replacement kit is field replaceable and includes everything you need to replace your Impact Surface, including the actual plastic Impact Surface, screws, top locks, and washers.
The Impact Trolley is the only trolley on the market designed specifically for impact braking in the recreational zip line and ropes course industry. Engineered specifically for the zipSTOP Zip Line Brake system, the Impact Trolley provides smoother braking, enhanced rider experience, reduced cable wear, and decreased rider risk. Maximum operating speed is 75 mph (120 kph) and the suitable rider weight range is 33–330 lbs (15–150 kg).